![]() ![]() Wireless Direct allows your Wi-Fi devices (for example: computers or smartphones) to connect to your printer directly through Wi-Fi, using the process you currently use to connect your Wi-Fi device to new wireless networks and hotspots. ![]() ![]() Select your network from the list of detected networks.Ĭonnect wirelessly to the printer without a router.Write down your network name (SSID) and WEP key or WPA passphrase. To connect the product with the Wireless Setup Wizardġ. Broadband Internet access (recommended) such as cable or DSL.If you connect the HP Photosmart on a wireless network that has Internet access, HP recommends that you use a wireless router (access point or base station) that uses Dynamic Host Configuration Protocol (DHCP).A wireless 802.11b/g/n network that includes a wireless router or access point.To connect the HP Photosmart to an integrated wireless WLAN 802.11 network, you will need the following: Wireless with a router (infrastructure network) Make sure your WPS-enabled wireless router supports PIN method. Press and hold the button on WPS-enabled router or other networking device for three seconds toĪ.Touch the down arrow to scroll through the options.From the Home screen, touch the Wireless icon, and then touch Settings.Make sure your WPS-enabled wireless router supports PBC method. Use Push Button Configuration (PBC) methodĪ. To connect the HP Photosmart using WiFi Protected Setup (WPS) The computer must be connected to the wireless network that you intend to install the HP Photosmart on. A desktop computer or laptop with either wireless networking support, or a network interface card (NIC).A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.To connect the HP Photosmart to a wireless network using WiFi Protected Setup (WPS), you will need the following: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |